LOGGERS/POWER METER/PQA

KEW 5020

3 channel inputs for the simultaneous recording of Leakage Current , Load Current and Voltage

• Power Quality analysis
• Large capacity for storing 60,000 data points
• Lowpass Filter will filter out the harmonics
• LED flickers when the preset current/voltage value is exceeded
• CALL: Confirmation of recorded data
• Selection of One-time mode or Endless mode
• Non Volatile Memory
• Battery power indicator
• The userfriendly PC software “KEW LOG Soft 2” is supplied
• Continuous measuring time: Approx. 10 days (Alkaline Battery)

KEW 5010

3 channel inputs for the simultaneous recording of Leakage Current and Load Current

• Large capacity for storing 60,000 data points
• Lowpass Filter will filter out the harmonics
• LED flickers when the preset current value is exceeded
• CALL: Confirmation of recorded data
• Selection of One-time mode or Endless mode
• Non Volatile Memory
• Battery power indicator
• The userfriendly PC software “KEW LOG Soft 2” is supplied
• Continuous measuring time: Approx. 10 days (Alkaline Battery)

KEW 6305

• Comprehensive real-time monitoring, recording and analysis of single and 3-phase systems
• Voltage, Current, Power Factor and Frequency measurements
• Power analysis (Active, Apparent and Reactive power)
• Energy analysis (Active, Apparent and Reactive energy)
• Active power accuracy: ±0.3%rdg±0.2%f.s.
• Automatic wiring check function to prevent incorrect connections
• Large memory capability (2GB) using built-in SD card Interface
• Recording interval can be set between 1 second and 1 hour
• Real-time and remote measurements
• Windows software for data analysis and setting via USB port or Bluetooth®
• Synchronous measurements between two units of KEW 6305
• Wide selection of clamp sensors allow measurements from 0.1 to 3000A
• Automatic recoginition of connected sensor type
• Double power supply system via AC line and batteries

KEW 6305-05

Power Meter and Flexible Clamp Sensor set model
KEW 6305 ＋ KEW 8133（3000A : φ170mm）× 3

KEW 6305-03

Power Meter and Flexible Clamp Sensor set model
KEW 6305 ＋ KEW 8130（1000A : φ110mm）× 3

KEW 6305-01

Power Meter and clamp sensor set model
KEW 6305 ＋ KEW 8125（500A : φ40mm）× 3

KEW 6315

• Simultaneous Power & Power quality measurements
• Helpful support functions
• Measurement with high accuracy
• Remote monitoring on PC and Android device
• Various Clamp Current Sensors
• Energy consumption check on site
• IEC 61010-1 CAT IV 300V, CAT III 600V, CAT II 1000V

KEW 6315-05

Power Quality Analyzer and Flexible Clamp Sensor set model
KEW 6315 ＋ KEW 8133（3000A : φ170mm）× 3

KEW 6315-04

Power Quality Analyzer and Flexible Clamp Sensor set model
KEW 6315 ＋ KEW 8130（1000A : φ110mm）× 4

KEW 6315-03

Power Quality Analyzer and Flexible Clamp Sensor set model
KEW 6315 ＋ KEW 8130（1000A : φ110mm）× 3

KEW 6315-01

Power Quality Analyzer and Clamp Sensor set model
KEW 6315 ＋ KEW 8125（500A : φ40mm）× 3

KEW 5050

• Provides simultaneous measurements and logs up to 4 channels
• Supports various wiring systems
  (Single-phase 2&3-wire, Three-phase 3&4-wire*) *Except Ior for 3 Phase 4 wire
• World’s fastest class speed at 200ms interval for leakage current measurement
• Offers both traditional leakage / load current measurements
• Large graphic display and magnet on the back case to attach it on metal enclosures

KEW 5050-02

Ior logger and clamp sensor set model
KEW 5050 ＋ KEW 8177（φ40mm）× 1

KEW 5050-01

Ior logger and clamp sensor set model
KEW 5050 ＋ KEW 8178（φ68mm）× 1

KEW 2062BT

A tear drop shape jaw with the conductor size 55 mm: Convenient to use at a small-sized office and factory

KEW 2062

A tear drop shape jaw with the conductor size 55 mm: Convenient to use at a small-sized office and factory

KEW 2060BT

A tear drop shape jaw with the conductor size 55 mm: Convenient to use at a small-sized office and factory