KEW LOG Soft2
【System requirements】
| OS | Windows® 11/10 |
|---|---|
| Display | XGA (1024×768 dots) or more |
| Hard-disk | Space required 100Mbyte or more |
| Others | With CD-ROM drive and USB port |
Normal Recording Mode
(AC 50/60Hz, Sine wave, Input: 10% or more of the range at CH1)
| Range | RMS Accuracy |
|---|---|
| 100.0mA | ±2.0%rdg±0.9%f.s.+ Accuracy of Sensor |
| Other ranges | ±1.5%rdg±0.7%f.s.+ Accuracy of Sensor |
| Crest Factor | 2.5 or less: RMS accuracy (sine) + 2%rdg + 1%f.s. |
*Max, Min and Instant Peak values in Normal Recording mode are just reference values:
their accuracies aren’t guaranteed.
Trigger Recording Mode (AC 50/60Hz sine wave)
| Range | Accuracy |
|---|---|
| 100.0mA | ±3.5%rdg±2.2%f.s.+ Accuracy of Sensor |
| Other ranges | ±3.0%rdg±2.0%f.s.+ Accuracy of Sensor |
Capture Recording Mode
| Recording mode | Normal, Trigger, Capture, Power Quality Analysis |
|---|---|
| Operating system | Successive Approximation (CH1 single synchronized sampling) |
| Rated max. working voltage | AC 9.9Vrms, 14V peak value |
| Number of input channel | 3ch |
| Measuring method | True RMS |
| RMS measuring interval | Approx. 100ms |
| Sampling interval | Normal/Trigger mode : Approx. 1.65ms/CH Capture mode : Approx. 0.55ms (waveform: at every 1.1ms) P.Q.A mode : Approx. 0.55ms |
| Current range | 8146 (30A type) : 100.0/1000mA/10.00/30.0A 8147 (70A type) : 100.0/1000mA/10.00/70.0A 8148 (100A type) : 100.0/1000mA/10.00/100.0A 8121 (100A type) : 10.00/100.0A 8122 (500A type) : 50.00/500.0A 8123 (1000A type) : 100.0/1000A 8128/8135 (5A type) : 5.000A/(50.00A) 8127 (100A type) : 10.00A/100.0A 8126 (200A type) : 20.00A/200.0A 8125 (500A type) : 50.00A/500.0A 8124 (1000A type) : 100.0A/1000A 8130 (1000A type) : 100.0/1000A |
| Voltage range | 8309 (600V type) : 600.0V |
| Low battery warning | Battery mark display (in 4 levels) |
| Over-range indication | “OL” mark is displayed when exceeding the measuring range |
| Auto power off | Turns off the instrument automatically if there is no switch operation for about 3 min.(This function doesn’t work during a recording.) |
| Possible measurement time | Approx. 10 days (with alkaline LR6 batteries) |
| Applicable standards | IEC 61010-1:2001 CAT III 300V Pollution degree2 IEC 61326 (EMC standard) |
| Dimension | 111(L)×60(W)×42(D)mm |
| Weight | Approx. 265g |
| Accessories | 7148 (USB cable), 9118 (Carrying case), Alkaline battery LR6×4pcs, PC software “KEW LOG Soft 2”, Instruction manual, Quick manual, Install manual, USB Notice sheet |
| Optional Accessories | 8146/8147/8148 (Leakage & Load current Clamp Sensor), 8121/8122/8123 (Load current Clamp Sensor), 8124/8125(*1)/8126(*2)/8127(*3)/8128 (Load current Clamp Sensor), 8130(*4)/8135 (Flexible Clamp Sensor), 8309 (Voltage sensor) 7185 (Extension cable for sensor), 8320 (AC Adapter), 9135 (Carrying bag), |
*1-4 Can use with after the following serial numbers.
*1:8125 No.02637-
*2:8126 No.00151-
*3:8127 No.00181-
*4:5020 No.8031560-
Accessories/Optional Accessories /Related Products
MODEL 7148
MODEL 9118
KEW 8146
KEW 8147
KEW 8148
KEW 8121
KEW 8122
KEW 8123
KEW 8124
KEW 8125
KEW 8126
KEW 8127
KEW 8128
KEW 8130
KEW 8135
KEW 8309
MODEL 7185
MODEL 8320
MODEL 9135
Reviews
There are no reviews yet.